Turbo Chill Tubes Manufacturers & Suppliers

TURBO CHILL Fin Tube is an integral low fin tube provided with spiral inside ridges on the inner diameter of the tube. In a Turbo Chill Fin Tube, the inside fluid heat transfer capability is remarkably improved in comparison with the smooth in-tube type tubes. By the effects multiplied mutually by the tubes outside fins and inside spiral ridges a high coefficient for overall heat transfer is obtained. These parameters significantly contribute to the reduction in size of various freezing machines.

Tube Tech manufactures all types of Turbo Chill Fin Tubes with a variety of outer fins and inner ridge combinations. These turbo chill fin fin tubes are fabricated in alloy C 12200 to meet the chemical, mechanical and other test parameters of ASTM B 75 / B 359 and in alloy 70600 & 71500 to meet the chemical, mechanical and other test parameters of ASTM B 111 / B 359. BS EN, JIS and DIN standards are also available on request.

FIN PARAMETERS
Tube Dia Wall Thickness Fin Density Fin Dia Fin Depth Root Dia Wall Thickness under Fins
19.05 mm 1.83 mm 19 / 26 / 40 18.80 mm 1.52 mm 15.76 mm 1.20 mm
19.05 mm 1.65 mm 19 / 26 / 40 18.80 mm 1.50 mm 15.80 mm 1.90 mm
19.05 mm 1.47 mm 19 / 26 / 40 18.80 mm 1.42 mm 15.96 mm 0.71 mm
19.05 mm 1.32 mm 19 / 26 / 40 18.80 mm 1.24 mm 16.32 mm 0.59 mm
19.05 mm 1.18 mm 19 / 26 / 40 18.80 mm 0.83 mm 17.14 mm 0.55 mm
15.87 mm 1.47 mm 19 / 26 / 40 15.70 mm 1.42 mm 12.86 mm 0.71 mm
15.87 mm 1.32 mm 19 / 26 / 40 15.70 mm 1.24 mm 13.22 mm 0.59 mm
  • For tube parameters of 22.2 mm, 25.4 mm tube or any other special requirements please contact us.
  • Turbo Chill tubes with fin density other than mentioned in the above chart can be produced on request.
  • Turbo Chill Tubes are generally supplied in the “as finned” condition. However, temper annealing Or end annealing of alloy 70600 & 71500 can be done upon specific request.
  • Turbo Chill Fin Tubes are generally supplied in the “as finned” condition. However, alloy 70600 & 71500 can be supplied in “annealed” temper upon specific request.
  • Turbo Chill Tubes are generally produced with desired plain ends, tubes can also be fabricated with intermediate landings upon specific request
  • Turbo Chill Tubes are produced in straight length up to 8 Meters. Bigger lengths can be accommodated on request.
  • Turbo Chill Tubes are supplied with deburred / smooth ends.
  • All the tubes are hydro tested at desired pressure after finning operation to ensure defect free products.
END APPLICATIONS:

Refrigeration, Chemical, Petrochemical, LNG, Boiler Applications etc.